warm edge spacer
warm-edge insulating glass spacer  
Home Company Product Equipment Prodution Process Quality Certificate Contact Us 簡體中文 PYCCKNЙ
Home > Product >Warm edge spacer - Introduction of Jinyu single-componenthot melt adhesive for insulating glass
  warm edge spacer Chuang Li Lai Co.LTD--Product introduction--Introduction of Jinyu single-componenthot melt adhesive for insulating glass

warm edge spacer
Chuanglilai Compound sealing spacer warm-edge insulating glass spacer

warm-edge insulating glass spacer


■Introduction of Chuanglilai® compound sealing spacer for IG warm-edge insulating glass spacer


    We manufactured Chuanglilai® compound Insulating spacer through 5 years’ research on our own. We made a big amount of improvement and innovation on this product. This product fills up the blank of our country; its quality reaches to the international level. It keeps the strong points and overcomes the shortages of the traditional sealing spacer. The quality goes up a lot. It has become a big progress in the manufacture of warm-edge insulating glass spacer.
Highlights of Chuanglilai® compound Insulating spacer:
1. The support strength between glasses: The height of the wave aluminum upgrade from the original 1.8mm to 4.8mm, the Anti-pressure is much excellent than before, and with macromolecule plastic, the distortion problem can be improved by warm edge spacer.
2. Big advancement in Moisture absorption: Big contents of desiccant in the inner side of spacer increase the ability of absorbing moisture.
3. Tensile Strength: The framework of the traditional sealing spacer is only aluminum strip. But the Chuanglilai spacer’s is composed by aluminum strip, plastic strip and aluminum foil. Now the tensile strength is much higher than the traditional spacers.
4. Pack in vacuum aluminum foil, with humidity card inside: We pack our products in the vacuum aluminum foil bag, and put a humidity card inside; warm edge spacer will show the absorption ability of moisture of the spacer.
5. Two-way Usage:
    You can use the warm-edge insulating glass spacers separately;
    You can spread single-component HMB or Polysulfide adhesive on the outside of the warm-edge insulating glass spacer, to enhance its structure.
6. Unique manufacture method makes good endurance ability in weathers or humidity.

(warm edge spacer--warm-edge insulating glass spacer)

Insulating Glass
Copyright?2006-2011 Chuang Li Lai Co.LTD
TEL: 0427-6852077 13700073652 FAX: 0427-6852080 E-mail: [email protected]

產品推薦: 暖邊膠條 中空玻璃膠條 玻璃密封條 熱熔膠 熱熔丁基膠 熱熔打膠機 膠條式清洗機 膠條式熱壓機 中空玻璃清洗機 中空玻璃熱壓機 中空玻璃生產線 中空玻璃熱融打膠機 門窗密封毛條 都賽爾 Insulating Glass Spacer CLL Turspacer swiggle Truseal Duraseal glass washing and drying machine glass hot press glass assembly table glass rolling over table warm-edge insulating glass spacer

qq卡五星麻将下载 上海快三开奖号码查询 16172期彩票中奖号码 竞彩篮球大小分如何分 四海归一打一生肖 打彩票看号口诀 重庆时时的正规网址 新疆25选7最近开奖结果 安徽快三遗漏号 搞微影的赚钱吗 凤凰心水凤凰心水 河北20选5走势图带连线 黑马时时彩计划软件 出国哪个国家工厂赚钱多 百度重庆时时开奖结果 时时彩走势图全部 老快3开奖